3 S 40A Geliştirilmiş Versiyonu için 11.1 V 12.6 V 18650 lityum pil koruma Kurulu matkap 40A akım
This is 3
A enhanced Version!If you need other Version,Pls check here : Standard version : suitable for starting current below 60
A, power 100
W below the drill. Enhanced version : for starting current below 80
A, power 135
W below the drill. Balanced version : suitable for starting current below 80
A, power 135
W below the drill. 3
A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope : Nominal voltage of 3.6 V, 3.7 V lithium battery (including 18650,26650, polymer lithium battery)
Product Size : 42*55*3.4mm (Enhanced version)
Product weight : 8.8g (balanced version)
Charging voltage : 12.6 V - 13.6 V
Continuous discharge current (upper limit) : 40 A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit) : 20 A
Note 1 : The successful start of the drill requires three 15 C-20 C power battery, or six 10 C-15 C power battery (ordinary 18650 can not start the drill!!).
Note 2 : strictly according to map wiring 0 V, 4.2 V, 8.4 V, 12.6 V, do not deliberately short circuit.
Note 3 : When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25 V, capacity 10u F-100u F) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
Note 4 : 3 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
For some of the poor basis of electronic customers to explain : balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better! (2 good battery +1 Poor battery use effect = 3 poor battery use effect). Package include : 1* 3 S 40 A Protection Board
Beyan Edilen Teknik Özellikler
- Marka Adı:
- Heltec Automation
- Model Numarası:
- 3S 40A
- Continuous charge current (upper limit):
- Board Size: